TOP FLANGE JOIST HANGER

Accessories

OEG Top Flange Joist Hanger is used to connect joists with cold formed steel headers and structural steel beams.

Available in 12ga (97 mils) and many widths, see ordering guide bellow.

inc-Coated (Galvanized) sheet metal meets or exceeds ASTM A653 and ASTM A1003

ORDERING INFORMATION
ITEM CODE
WIDTH (IN)
HEIGHT (IN)
JH1588
1 5/8
8
JH15812
1 5/8
12
JH26
2
6
JH28
2
8
JH210
2
10
JH212
2
12
JH214
2
14
JH216
2
16
JH256
2 1/2
6
JH258
2 1/2
8
JH2510
2 1/2
10
JH2512
2 1/2
12
JH2514
2 1/2
14
JH2516
2 1/2
16
ITEM CODE
WIDTH (IN)
HEIGHT (IN)
JH36
3
6
JH38
3
8
JH310
3
10
JH312
3
12
JH314
3
14
JH316
3
16
JH46
4
6
JH48
4
8
JH410
4
10
JH412
4
12
JH414
4
14
JH416
4
16
JH56
5
6
JH58
5
8
ITEM CODE
WIDTH (IN)
HEIGHT (IN)
JH510
5
10
JH512
5
12
JH514
5
14
JH516
5
16
JH66
6
6
JH68
6
8
JH610
6
10
JH612
6
12
JH614
6
14
JH616
6
16
Fasteners (top) (6)
Dimensions (in)
Allowable Downward Load (lb) (1)
6 - #12 Screws
W H B
See table 2
1860 (2)
6 - P.A.F.
W H B
See table 2
4050 (3)
1/8" x 1" Welds
W H B
See table 2
4550 (4)

1. Allowable loads are based on testing with full bearing of the joist and are governed by either serviceability or strength.

2. Allowable load is based on attachment to a 68 mil CFS supporting member.

3. Allowable load is based on Hilti X-U pins to 1/2" thick steel (Fy = 36 ksi min).

4. Allowable load is based on welds to 1/2" thick steel (Fy = 36 ksi min).

5. Joist hanger testing was in accordance with AISI S914-08 Test Standard for Joist Connectors Attached to Cold-Formed Steel Structural Framing.

6. Half the fasteners per tab and welds each side of each tab.

7. The design of the supporting header or beam, including bracing is the responsibility of a design professional.